Front Office
Institut Teknologi Sepuluh Nopember Surabaya

Kampus ITS Sukolilo - Surabaya 60111

Phone : 031-5921733 , 5923623
Fax : 031-5937774
E-mail :
Website :

Support (Customer Service) :


Have a problem with your access?
Please, contact our technical support below:

Davi Wahyuni

Tondo Indra Nyata

Anis Wulandari

Ansi Aflacha

ITS » Non Degree » Teknik Mesin - D3
Posted by at 28/03/2016 09:17:52  •  1294 Views


Author :
MUBAROT, ICHROS SOFIL ( 2111030066 )


Dalam Usaha Kecil Menengah UKM kerajinan Keris masih menggunakan alat yang sederhana dan cara manual untuk membentuk pamor keris. Salah satu alternatif untuk meningkatkan efisiensi dan kualitas produksi Kerajinan keris adalah membuat mesin power hammer. Mesin penempa logam yang akan dirancang ini lebih sederhana dengan gaya hasil tempa lebih besar dan konstan sehingga diperlukan perhitungan gaya tumbukan perhitungan tegangan pada pegas analisa struktur dan perhitungan diameter poros agar mesin dapat berjalan dengan baik dan aman Dari hasil perhitungan dan analisa didapatkan datadata berikut besar gaya tumbukan sebesar 19577 N dari perhitungan tegangan maksimum terjadi pada struktur bagian 2 adalah 2980 Nmm2 dan dari hasil simulasi besar tegangan maksimum sebesar 2867 mm2 selisih perhitungan manual dan hasil simulasi sebesar 379 sehingga tegangan yang terjadi lebih kecil dari yield strength material. Tegangan yang terjadi pada pegas sebesar 767 Nmm2 besar defleksi pegas yaitu 73mm besar diameter minimal poros adalah 206 cm sedangkan dari perencanaan dimensi diameter poros sebesar 35 cm maka poros dinyatakan aman.


In Small and Medium Enterprise Blade craft still using simple tools and manual way to form a dagger prestige. One alternative to improve efficiency and production quality make machine Crafts blade is a power hammer. Metal punch machine is designed to be simpler with style wrought greater results and constant so that the collision force is necessary calculations stress calculations in the spring structural analysis and calculation of the diameter of the shaft so that the engine can run properly and safely. From the calculation and analysis obtained the following data the force of the collision was 195.77 N from the calculation of the maximum stress occurs in the structure of part 2 is 29.80 Nmm2 and from the simulation results of the voltage to a maximum of 28.67 mm2 the difference between manual calculation and simulation results of 3.79 so the stress is less than the yield strength of the material. The voltage that occurs in the spring of 76.7 Nmm2 large deflection of the spring is 7.3 mm the minimum diameter of the shaft is a large 1.25 cm while the diameter of the shaft of the planning dimension of 3.5 cm then the shaft declared safe.

KeywordsBaja; Penempa; Keris
Subject:  Permesinan
  1. Ir.Eddy Widiyono, MSc
  2. Hendro Nurhadi, Dipl.-Ing, Ph.D
Date Create: 28/03/2016
Type: Text
Format: PDF
Language: Indonesian
Identifier: ITS-NonDegree-21102150001383
Collection ID: 21102150001383
Call Number: RSM 621.815 Mub p

Non Degree of Mechanical Engineering, RSM 621.815 Mub p, 2014

ITS Community

Copyright @2016 by ITS Library. This publication is protected by copyright and per obtained from the ITS Library prior to any prohibited reproduction, storage in a re transmission in any form or by any means, electronic, mechanical, photocopying, reco For information regarding permission(s), write to ITS Library

[ Download - Open Access ]

  1.  ITS-NonDegree-40930-2111 030 066 - abstract_id.pdf - 240 KB
  2.  ITS-NonDegree-40930-2111 030 066 - abstract_en.pdf - 252 KB
  3.  ITS-NonDegree-40930-2111 030 066 - conclusion.pdf - 224 KB

 Similar Document...


To facilitate the activation process, please fill out the member application form correctly and completely

Registration activation of our members will process up to max 24 hours (confirm by email). Please wait patiently


Bagaimana pendapat Anda tentang layanan repository kami ?

Bagus Sekali

You are connected from
using CCBot/2.0 (

Copyright © ITS Library 2006 - 2021 - All rights reserved.
Dublin Core Metadata Initiative and OpenArchives Compatible
Developed by Hassan