EMAIL: PASSWORD:
Front Office
UPT. PERPUSTAKAAN
Institut Teknologi Sepuluh Nopember Surabaya


Kampus ITS Sukolilo - Surabaya 60111

Phone : 031-5921733 , 5923623
Fax : 031-5937774
E-mail : libits@its.ac.id
Website : http://library.its.ac.id

Support (Customer Service) :
timit_perpus@its.ac.id




Welcome..guys!

Have a problem with your access?
Please, contact our technical support below:
LIVE SUPPORT


Davi Wahyuni


Tondo Indra Nyata


Anis Wulandari


Ansi Aflacha




ITS » Undergraduate Theses » Teknik Mesin Ekstensi - S1
Posted by ida at 20/08/2008 17:12:38  •  15950 Views


SOFTWARE DEVELOPMENT FOR DYNAMIC ANALYSIS OF FOURBAR LINKAGE IN FUNCTION GENERATION TYPE WITH THREE PRECISE POSITION WHICH APPLIED TO RICE SEPARATOR

Author :
Firmansyah, Redy 




ABSTRAK

Rice separator merupakan alat yang berfungsi untuk memisahkan gabah dengan beras. Alat ini menggunakan mekanisme fourbar linkage untuk menggerakkan separator.Mekanisme fourbar linkage merupakan salah satu jenis mekanisme yang sederhana murah serta mudah dibuat.Pada tugas akhir ini akan dilakukan analisa dinamika pada mekanisme fourbar linkage dengan cara analitis untuk menentukan gaya-gaya joint dan torsi input pada batang driver. Dan pada tugas akhir ini tidak melakukan analisa kekuatan material. Kemudian pada mekanisme yang dianalisa terdapat gaya eksternal yang berada di ujung follower yang berasal dari berat pelat separator. Analisa dari mekanisme ini akan ditampilkan dalam bentuk software yang menggunakan bahasa pemrograman Borland Delphy versi 7.0. Software ini menggunakan bentuk dan dimensi panjang dan luas penampang batang dari mekanisme fourbar linkage dan putaran motor penggerak sebagai input-an. Dan akan menghasilkan output berupa gaya-gaya joint pada mekanisme dan torsi input pada batang driver.


ABSTRACT

Rice separator is used for separating brown rice and rice. It use a fourbarlinkage mechanisme to work.Fourbar linkage mechanisme is a simple mechanisme lowcost and easy to build.In this final project dynamic analytic is use to find joint forces of mechanisme and input torque on driver bar. Without material strength. Which is in the end of follower there is an external force from the separator plate. This analyze will be shown in sofware form using 7.0 version of Borland Delphy. Where the input is form and dimension of mechanisme bars and the speed of electric motor rpm. And will make an output of joint forces from mechanisme and input torque on driver bar.



KeywordsMetode analitis, analisa dinamika, software
 
Subject:  Komputer -- Perangkat lunak
Contributor
  1. Ir A Aziz Achmad
Date Create: 20/08/2008
Type: Text
Format: pdf
Language: Indonesian
Identifier: ITS-Undergraduate-3100007030341
Collection ID: 3100007030341
Call Number: RSM 621.811 Fir p


Source
Undergraduate Theses,DEPARTMENT OF MECHANICAL ENGINEERING Faculty of Industrial Technology, RSM 621.811 Fir p

Coverage
ITS Community Only

Rights
Copyright @2007 by ITS Library. This publication is protected by copyright and permission should be obtained from the ITS Library prior to any prohibited reproduction, storage in a retrievel system, or transmission in any form or by any means, electronic, mechanical, photocopying, recording, or likewise. For information regarding permission(s), write to ITS Library




[ Download - Summary ]

ITS-Undergraduate-3100007030341-1998.pdf




 Similar Document...




! ATTENTION !

To facilitate the activation process, please fill out the member application form correctly and completely

Registration activation of our members will process up to max 24 hours (confirm by email). Please wait patiently

POLLING

Bagaimana pendapat Anda tentang layanan repository kami ?

Bagus Sekali
Baik
Biasa
Jelek
Mengecewakan





You are connected from 10.199.6.2
using CCBot/2.0 (https://commoncrawl.org/faq/)



Copyright © ITS Library 2006 - 2021 - All rights reserved.
Dublin Core Metadata Initiative and OpenArchives Compatible
Developed by Hassan