EMAIL: PASSWORD:
Front Office
UPT. PERPUSTAKAAN
Institut Teknologi Sepuluh Nopember Surabaya


Kampus ITS Sukolilo - Surabaya 60111

Phone : 031-5921733 , 5923623
Fax : 031-5937774
E-mail : libits@its.ac.id
Website : http://library.its.ac.id

Support (Customer Service) :
timit_perpus@its.ac.id




Welcome..guys!

Have a problem with your access?
Please, contact our technical support below:
LIVE SUPPORT


Moh. Fandika Aqsa


Davi Wahyuni


Tondo Indra Nyata


Anis Wulandari


Ansi Aflacha




ITS » Undergraduate Theses » Teknik Mesin - D3
Posted by marsud at 19/01/2010 12:40:07  •  8271 Views


RANCANG BANGUN PISAU MESIN PEMOTONG KERUPUK TAHU DENGAN SISTEM PNEUMATIK

BUILD BLADE DESIGN KERUPUK TAHU CUTTER MACHINE WITH PNEUMATIC SYSTEMS

Author :
Dananjaya, Tristar Eiger 




ABSTRAK

Kerupuk umumnya memiliki dimensi yang berbeda antara satu dengan yang lainnya hal ini disebabkan proses pengerjaanya masih menggunakan satu pisau dengan tenaga manusia manual sehingga sangat kurang efisien dalam peningkatan produksi yang dihasilkan. Maka dari itu perlu adanya perencanaan alat pemotong kerupuk dengan sistem pneumatik agar hasil pemotongan memiliki dimensi yang seragam dan meningkatkan produksi baik secara kualitas maupun kwantitas. Dalam perencanaan terlebih dahulu dipelajari karakteristik dari kerupuk. Kerupuk ini merupakan jenis kerupuk Puli dengan dimensi 15x15x15 cm. Pengujian dilakukan untuk mengetahui gaya total pemotongan dari kerupuk sehingga dapat dipakai dalam pemilihan silinder pneumatik desain pisau direncanakan sesuai dengan hasil yang diinginkan kemudian dilakukan perencanaan sirkuit dan perakitan komponen pneumatikselanjutnya pengujian alat bermaksud untuk mengetahui tingkat keberhasilan dari alat tersebut. Dari hasil percobaan tersebut didapatkan bahwa kerupuk dapat terpotong dengan gaya pemotongan atau penekanan 30 N. Dengan tekanan 6 bar didapat diameter silinder pneumatik sebesar 80 mm.


ABSTRACT

In generally kerupuk have the unumiformity dimension of each other this caused the process still use one knife with manpower manual so that very less efficient in product increase. Therefor it needs to planning of Kerupuk Tahu cutter machine with pneumatic system. So the result of cutting have uniform dimension and increase product either through quantity and also quality. On machine planning step it is necessary to define the characteristic first of the kerupuk The kerupuk used is a type of kerupuk puli with dimention 15x15x1.5 cm. The experiment is done with a cutter force for the selection of pneumatic cylinder blade desain according with the result of cutting that have planned then planning of circuit and assembling of component of pneumatic than experiment of appliance is done to know efficacy level. From the result its known that material can be well cutted with 30 N of force and 6 bar of air compressor that find the diameter of cylinder piston is 80 mm



KeywordsPemotongan; Kerupuk Tahu; Pneumatik
 
Subject:  Desain Mesin
Contributor
  1. Ir. NUR HUSODO , MSc.
Date Create: 19/01/2010
Type: Text
Format: Pdf
Language: Indonesian
Identifier: ITS-Undergraduate-3100009036564
Collection ID: 3100009036564
Call Number: RSM 621.815 Dan r


Source
Undergraduate Theses, Mechanical Engineerring, RSM 621.815 Dan r, 2009

Coverage
ITS Community

Rights
Copyright @2009 by ITS Library. This publication is protected by copyright and permission should be obtained from the ITS Library prior to any prohibited reproduction, storage in a retrievel system, or transmission in any form or by any means, electronic, mechanical, photocopying, recording, or likewise. For information regarding permission(s), write to ITS Library




[ Download - Summary ]

ITS-Undergraduate-3100009036564-8264.pdf




 Similar Document...




! ATTENTION !

To facilitate the activation process, please fill out the member application form correctly and completely

Registration activation of our members will process up to max 24 hours (confirm by email). Please wait patiently

POLLING

Bagaimana pendapat Anda tentang layanan repository kami ?

Bagus Sekali
Baik
Biasa
Jelek
Mengecewakan





You are connected from 54.92.192.156
using CCBot/2.0 (http://commoncrawl.org/faq/)



Copyright © ITS Library 2006 - 2016 - All rights reserved.
Dublin Core Metadata Initiative and OpenArchives Compatible
Developed by Hassan