EMAIL: PASSWORD:
Front Office
UPT. PERPUSTAKAAN
Institut Teknologi Sepuluh Nopember Surabaya


Kampus ITS Sukolilo - Surabaya 60111

Phone : 031-5921733 , 5923623
Fax : 031-5937774
E-mail : libits@its.ac.id
Website : http://library.its.ac.id

Support (Customer Service) :
timit_perpus@its.ac.id




Welcome..guys!

Have a problem with your access?
Please, contact our technical support below:
LIVE SUPPORT


Davi Wahyuni


Tondo Indra Nyata


Anis Wulandari


Ansi Aflacha




 List of Teknik Mesin Collections


Total of Records : 1982 collections


Published by ITS at 18/03/2016 13:11:50
COMPUTER AIDED PROCESS PLANNING DENGAN METODE VARIANT
KARYADI, BAGUS - Teknik Mesin - [ 1381 views]

Published by ITS at 18/03/2016 13:09:31
PERENCANAAN JIG DAN FIXTURE UNTUK PROSES PEMESINAN UNIVERSAL JOINT YOKE
BOEDIONO, AGOES - Teknik Mesin - [ 908 views]

Published by ITS at 18/03/2016 13:07:21
PERENCANAAN FIXTURE CRANKCASE INA 65 ANALISIS DEFLEKSI, DISTRIBUSI TEGANGAN DAN ALTERNATIF PEMBUATANNYA
PURNAMA, INDRA - Teknik Mesin - [ 1518 views]

Published by ITS at 18/03/2016 13:05:28
PENGARUH TEMPERATUR PEMANASAN DAN WAKTU PENAHANAN PADA DAERAH FASE GANDA BAJA KARBON MEDIUM
JAYA, KETUT LAKSANA - Teknik Mesin - [ 1193 views]

Published by ITS at 18/03/2016 13:03:28
PERENCANAAN PRESS TOOL UNTUK PEMBUATAN SENDOK TANAH
SETYADI, M. LUDFI - Teknik Mesin - [ 1202 views]

Published by ITS at 18/03/2016 12:59:13
MANUFAKTURING MESIN PAVING STONE BATACO II OSCAR 1500
TETOSAPUTRO, ARIONO - Teknik Mesin - [ 1098 views]

Published by ITS at 18/03/2016 12:56:46
PERENCANAAN DIE DAN SISTEM UNLOADING UNTUK PROSES HOT FORGING GEAR SPROCKET
SYAFRIA, EFFENDI - Teknik Mesin - [ 947 views]

Published by ITS at 18/03/2016 12:54:16
ANALISA TEGANGAN DRILLPIPE PADA PROSES DIRECTIONAL DRILLING
ROCHIM, AR - Teknik Mesin - [ 969 views]

Published by ITS at 18/03/2016 12:20:10
PERENCANAAN SISTIM DUCTING PADA INSTALASI WASTE HEAT DRYER
SLAMET, GUNAWAN - Teknik Mesin - [ 1160 views]

Published by ITS at 18/03/2016 12:18:28
PERENCANAAN PROSES PEMBUATAN GEAR BLANK
HARYADI, EDI - Teknik Mesin - [ 875 views]

Published by ITS at 18/03/2016 12:16:10
PERENCANAAN DAN PROSES PEMBUATAN INJECTION MOULD UNTUK HOUSING THREAD DENGAN EMPAT CAVITY
SUBEKTI, MOH - Teknik Mesin - [ 917 views]

Published by ITS at 18/03/2016 12:13:22
ANALISA TEGANGAN DAN PERENCANAAN PROSES PEMESINAN ROLLER GILINGAN TEBU PADA MESIN CNC
DWIANTO, ARIES - Teknik Mesin - [ 1144 views]

Published by ITS at 18/03/2016 12:11:54
ANALISA DAN PERENCANAAN PROSES PEMESINAN PADA MODULAR VERTIKAL CLAMPING BLOCK
EFDWIANTORO, HENDRO - Teknik Mesin - [ 1099 views]

Published by ITS at 04/03/2016 09:56:18
STUDI EKSPERIMENTAL PENAMBAHAN SUPERPLASTICIZER PADA BETON BERTULANG TERKAIT SERANGAN KOROSI BAJA TULANG DENGAN METODE ALAMI DAN PAKSA
KUSUMADEWAYANTI, ESTHI - Teknik Mesin - [ 919 views]

Published by ITS at 04/03/2016 09:51:51
PENGARUH PENAMBAHAN GAS HHO TERHADAP UNJUK KERJA MESIN DIESEL PUTARAN KONSTAN DENGAN VARIASI MASSA KATALIS KOH PADA GENERATOR GAS HHO
WIRAWAN, FAHMI - Teknik Mesin - [ 1258 views]

Published by ITS at 04/03/2016 09:51:47
PENGARUH PENAMBAHAN GAS HHO TERHADAP UNJUK KERJA MESIN DIESEL PUTARAN KONSTAN DENGAN VARIASI MASSA KATALIS KOH PADA GENERATOR GAS HHO
WIRAWAN, FAHMI - Teknik Mesin - [ 1101 views]

Published by ITS at 04/03/2016 09:51:19
STUDI EKSPERIMENTAL PENAMBAHAN SUPERPLASTICIZER PADA BETON BERTULANG TERKAIT SERANGAN KOROSI BAJA TULANG DENGAN METODE ALAMI DAN PAKSA
KUSUMADEWAYANTI, ESTHI - Teknik Mesin - [ 1019 views]

Published by ITS at 02/03/2016 15:58:59
EXPERIMENTAL STUDY ON THE EFFECT OF VARIATION INTERNAL CHILL DIMENSION TOWARDS SHRINKAGE DEFECT IN ALUMINIUM 6061 CASTING
KUSUMA, NURHADI GINANJAR - Teknik Mesin - [ 731 views]

Published by ITS at 02/03/2016 15:51:53
STUDI EKSPERIMEN PENGARUH VARIASI DIMENSI CIL DALAM (INTERNAL CHILL) TERHADAP CACAT PENYUSUTAN (SHRINKAGE) PADA PENGECORAN ALUMINIUM 6061
KUSUMA, NURHADI GINANJAR - Teknik Mesin - [ 811 views]

Published by ITS at 01/03/2016 10:59:28
EXPERIMENTAL STUDY ON THE EFFECTIVENESS OF ADDING ANNULAR FINS COLLECTORS SOLAR WATER HEATING WITH ONE AND TWO GLASS COVER
WIRAPRAJA, EDO - Teknik Mesin - [ 762 views]

Rec : 21-40 of 1982

Prev   Next
 
 Latest Posting for Collections...

STEADY-STATE CORNERING MODELING AND ANALYSIS of THREE-WHEEL NARROW VEHICLE
Teknik Mesin  •  1634 views


EXPERIMENTAL STUDY OF THE EFFECT STROUHAL NUMBER WITH FLOW OF BEHIND THE CIRCULAR CYLINDER DISTURBED BY D-TYPE CYLINDER "Case Study For Distance S / D = 0.6 to 1.375"
Teknik Mesin  •  1397 views


STUDI EKSPERIMEN PENGARUH BILANGAN STROUHAL TERHADAP ALIRAN di BELAKANG SILINDER SIRKULAR YANG DIGANGGU SILINDER TERIRIS TIPE-D “Studi Kasus Untuk Jarak S/D = 0,6 – 1,375”
Teknik Mesin  •  1346 views


MODELING AND ANALYSIS OF DPEMODELAN DAN ANALISIS RESPON DINAMIS KENDARAAN TRUKYNAMIC RESPONSE OF TRUCK IN EFFECT OF ROAD PROFILE AND ENGINE VIBRATION
Teknik Mesin  •  1206 views


PEMODELAN DAN ANALISIS RESPON DINAMIS KENDARAAN TRUK AKIBAT PENGARUH PROFIL JALAN DAN GETARAN ENGINE
Teknik Mesin  •  1287 views



! ATTENTION !

To facilitate the activation process, please fill out the member application form correctly and completely

Registration activation of our members will process up to max 24 hours (confirm by email). Please wait patiently

POLLING

Bagaimana pendapat Anda tentang layanan repository kami ?

Bagus Sekali
Baik
Biasa
Jelek
Mengecewakan





You are connected from 10.199.6.2
using CCBot/2.0 (https://commoncrawl.org/faq/)



Copyright © ITS Library 2006 - 2021 - All rights reserved.
Dublin Core Metadata Initiative and OpenArchives Compatible
Developed by Hassan