EMAIL: PASSWORD:
Front Office
UPT. PERPUSTAKAAN
Institut Teknologi Sepuluh Nopember Surabaya


Kampus ITS Sukolilo - Surabaya 60111

Phone : 031-5921733 , 5923623
Fax : 031-5937774
E-mail : libits@its.ac.id
Website : http://library.its.ac.id

Support (Customer Service) :
timit_perpus@its.ac.id




Welcome..guys!

Have a problem with your access?
Please, contact our technical support below:
LIVE SUPPORT


Davi Wahyuni


Tondo Indra Nyata


Anis Wulandari


Ansi Aflacha




ITS » Master Theses » Rekayasa Kualitas S2
Posted by aprill@is.its.ac.id at 28/08/2012 08:08:00  •  1849 Views


PENGEMBANGAN MODEL BIAYA DAN KEUNTUNGAN UNTUK BAN REMANUFAKTUR BERDASARKAN PERSPEKTIF PRODUSEN DAN KONSUMEN

BENEFIT AND COST MODELS DEVELOPMENT FOR REMANUFACTURING TIRE BASED ON PRODUCERS AND CUSTOMERS PERSPECTIVE

Author :
RACHMAN, MIERZA EVITA  ( 2509201005 )




ABSTRAK

Remanufaktur ban retreading merupakan salah satu upaya untuk menjaga lingkungan dari pencemaran limbah ban karena hanya bagian tread yang diperbarui. Meskipun demikian ban remanufaktur diharapkan memiliki kualitas yang setara dengan ban baru. Untuk itu dalam penelitian ini dilakukan pengujian keseragaman data terhadap rata-rata masa pakai ban remanufaktur dengan ban baru. Berdasarkan hasil penelitian pendahuluan terhadap masa pakai ban pesawat menunjukkan bahwa masa pakai ban remanufaktur tidak berbeda secara signifikan dengan ban baru. Jika secara teknis kualitas dan masa pakai ban remanufaktur sama dengan ban baru maka perlu dilakukan kajian apakah secara ekonomi keduanya juga memiliki kinerja yang sama. Penelitian ini mengembangkan model biaya dan keuntungan untuk ban remanufaktur berdasarkan perspektif produsen dan konsumen dengan memperhatikan aspek teknis yaitu masa pakai ban dan aspek lingkungan yaitu biaya yang muncul akibat penggunaan material yang bersifat non-renewable. Model yang dikembangkan dapat digunakan untuk membandingkan kinerja ekonomifinansial dari ban remanufaktur dengan ban baru. Dengan demikian informasi tentang range profit dan opportunity losses yang akan diperoleh ketika produsen maupun konsumen memilih ban remanufaktur dalam proses bisnisnya dapat diperkirakan. Hasil yang diperoleh dari penelitian ini menunjukkan bahwa ban remanufaktur lebih menguntungkan bagi produsen sedangkan ban baru lebih menguntungkan bagi konsumen. Hal ini juga dipengaruhi oleh adanya biaya lingkungan yang mempengaruhi besar keuntungan yang akan diperoleh produsen dimana biaya lingkungan untuk ban baru nilainya lebih besar daripada ban remanufaktur.


ABSTRACT

Tire remanufacturing retreading is the one way for protect the environment from the scraft tire because just the tread that can be renewing. So that the remanufacturing tire have been expected to equivalent with the new tire quality. In this research used the uniformity test for the lifetime data for remanufacturing and new tires. Based on the result of preliminary studies for lifetime of aircraft tire shows that the remanufacturing tires lifetime did not significantly different with the new tires. If that quality and life time are equal it needed a research about the economics performance for the tire. This research develops benefit and cost model for tire remanufacturing based on the producers and customers perspective which is concern to the thecnical aspecs with the reliability and environmental aspecs that are the cost due to using the non-renewable material. That models can be used to know about the economicsfinancial performance for remanufacturing and new tire. So that information about the profit range and the opportunity losses can be expected when the producer or customer using remanufacturing tire in their business process. The results from this study indicate that the remanufacturing tire is more profitable for the producer but for the customer the new tire is more beneficial. It is influenced by the environmental cost that give an effect for the producer gains where the environmental cost of new tire more expensive than the remanufacturing tire.



Keywordsremanufacturing tire; benefit and cost models; opportunity losses dan environtmental cost
 
Subject:  Manajemen perindustrian
Contributor
  1. Dr. Maria Anityasari, ST, ME
  2. Imam Baihaqi, ST., M.Sc
Date Create: 07/02/2012
Type: Text
Format: PDF
Language: Indonesian
Identifier: ITS-Master-3100012047409
Collection ID: 3100012047409
Call Number: RTI 658.5 Rac p


Source
Master Theses, Industrial Engineering, RTI 658.5 Rac p, 2012

Coverage
ITS Community

Rights
Copyright @2012 by ITS Library. This publication is protected by copyright and per obtained from the ITS Library prior to any prohibited reproduction, storage in a re transmission in any form or by any means, electronic, mechanical, photocopying, reco For information regarding permission(s), write to ITS Library




[ Download - Open Access ]

  1.  ITS-Master-20749-2509201005-Abstract_id.pdf - 166 KB
  2.  ITS-Master-20749-2509201005-Abstract_en.pdf - 165 KB
  3.  ITS-Master-20749-2509201005-Conclusion.pdf - 216 KB




 Similar Document...




! ATTENTION !

To facilitate the activation process, please fill out the member application form correctly and completely

Registration activation of our members will process up to max 24 hours (confirm by email). Please wait patiently

POLLING

Bagaimana pendapat Anda tentang layanan repository kami ?

Bagus Sekali
Baik
Biasa
Jelek
Mengecewakan





You are connected from 10.199.6.2
using CCBot/2.0 (https://commoncrawl.org/faq/)



Copyright © ITS Library 2006 - 2021 - All rights reserved.
Dublin Core Metadata Initiative and OpenArchives Compatible
Developed by Hassan